Fabric Roll Racking – Garment Warehouse Racking (Parosi Project)

Fabric Roll Racking at the Parosi Garment Factory – Heavy-Duty Fabric Warehouse Racking for the Garment Industry

Long Quyen designed and installed a fabric roll racking system for the Parosi garment factory, as well as for many other textile and garment companies such as Hung Ha Garment, Sao Mai and YIC Vina. Multi-tier fabric warehouse racking lets fabric rolls and bales be stacked high and neatly, keeps lots clearly separated, protects materials from floor moisture and mildew, and speeds up material picking for the sewing lines. The project was surveyed, designed and installed directly by Long Quyen Racking – a fabric warehouse racking manufacturer with nearly 30 years of experience.

500–2.000 kgLoad capacity per level
x2 – x3Fabric warehouse capacity
30+Years of Long Quyen experience
Project overview

Parosi Fabric Roll Racking Project Overview

The project focused on the main fabric warehouse, where fabric rolls, fabric bales and trims are stored for the sewing lines. All fabric warehouse racking was manufactured at the Long Quyen factory and installed on site.

🏭

Clients

Parosi garment factory, together with the textile and garment companies Hung Ha Garment, Sao Mai and YIC Vina.

📦

Scope

Heavy-duty multi-tier fabric warehouse racking, laid out along forklift aisles, with each bay holding multiple fabric bales.

⚙️

Requirements

Increase the capacity of a cramped fabric warehouse, prevent mildew and help storekeepers find the right colour and lot quickly.

🧰

Long Quyen’s scope

Warehouse survey, design tailored to each fabric type, manufacturing at our factory at 1085 Phuc Dien, Xuan Phuong Ward, and complete installation.

The customer’s challenge

The Fabric Warehouse Problem Before Racking

Before the project, fabric was stacked directly on the warehouse floor, causing many problems for production.

📉

Cramped fabric warehouse

Fabric rolls and bales were spread across the floor without using the building height, so the warehouse quickly ran out of space.

💧

Moisture and mildew from the floor

Fabric bales in direct contact with the floor easily absorbed moisture, causing mildew and discoloration.

🔎

Hard to find the right lot

Fabrics of many colours and lots were mixed together, so storekeepers had to dig through piles to find the right code.

⏳

Slow material supply

Picking fabric and trims for the sewing lines took too long, affecting order schedules.

Technical specifications

Fabric Warehouse Racking Specifications

The specification range Long Quyen applies to fabric roll racking systems in garment factories.

Load capacity 500 – 2,000 kg per level, depending on design
Number of levels 2 – 5 levels, depending on warehouse height
Level decking Steel sheet, wire mesh or beams, chosen according to the fabric stored
Goods stored Fabric rolls, fabric bales, cartons of trims and accessories
Rack type Shelf racking with decks for fabric bales, or cantilever racking and bar holders for long fabric rolls
Material Industrial roll-formed steel
Finish Anti-rust epoxy powder coating
Warranty 24–60 months (depending on rack type and accessories), lifetime technical support

Loads and structures are calculated according to international practice for pallet racking systems.

Long Quyen’s solution

The Solution Long Quyen Delivered

Long Quyen designed the racking around the way the customer actually stores fabric, instead of applying a one-size-fits-all configuration.

📐

Designed for each fabric type

Decked shelf racking for fabric bales, or cantilever racking and bar holders for long fabric rolls, maximising the capacity of each bay.

⬆️

Making use of warehouse height

2 – 5 levels arranged to the actual ceiling height to multiply capacity without expanding the floor area.

🚜

Laid out for forklift aisles

Row spacing is calculated so forklifts can move in and out easily, shortening inbound and outbound times.

🛡️

Rust- and moisture-resistant

Epoxy powder-coated steel frames; fabric sits on the rack levels and never touches the warehouse floor directly.

Results

Results After Installing the Fabric Roll Racking

After the racking was installed, the fabric warehouse runs far more neatly and quickly than before. This is also why many factories choose Long Quyen fabric warehouse racking.

📈

Capacity increased 2 – 3 times

Fabric is stored vertically instead of spread over the floor, so the warehouse now holds several times its previous volume.

💎

Dry, clean fabric

Fabric bales sit on the rack levels, away from floor moisture, which limits mildew and discoloration.

🗂️

Clear lot separation

Each rack bay corresponds to one lot and one fabric code, so counting and locating goods takes only seconds.

⚡

Faster material picking

Fabric and trims are supplied to the sewing lines noticeably faster, supporting order schedules.

Real photos

Real Photos of Fabric Roll Racking in Garment Warehouses

Photos of Long Quyen fabric warehouse racking installed and handed over to garment industry customers. See more photos of fabric warehouse racking installed by Long Quyen nationwide.

Long Quyen fabric roll racking installed at the Parosi garment factory Multi-tier powder-coated steel fabric warehouse rack frames Rows of multi-tier racking for fabric rolls and bales in a garment warehouse Fabric roll racking fully loaded with garment materials and trims Close-up of a fabric racking bay holding fabric rolls with clearly separated lots Forklift aisle between two rows of fabric roll racking in a garment factory warehouse
About us

Why Choose Long Quyen?

A factory with nearly 30 years of experience

Manufactured directly at our Xuan Phuong factory in Hanoi – no middlemen, factory-direct prices.

Free 3D layout design

Free warehouse survey, 3D drawings and load calculations before quotation.

Nationwide installation

Professional installation teams delivering on schedule across Vietnam.

European standards

High-quality steel, powder coating, load testing to FEM/SEMA standards.

Long-term warranty

Product warranty, scheduled maintenance and fast supply of spare parts.

Trusted by 500+ businesses

Partner to leading logistics, manufacturing and distribution companies in Vietnam.

GET FREE ADVICE →

Process

Project Implementation Process

1

Contact

Receive your needs, preliminary advice

2

Survey

Free on-site warehouse measurement

3

Design

3D layout drawing + quotation

4

Manufacturing

Fabricated at our Hanoi factory

5

Installation

Installation and load acceptance testing

6

Warranty

Long-term scheduled maintenance

FAQ

Frequently Asked Questions About Fabric Roll Racking

What types of fabric roll racking are there?
The most common are decked shelf racking for fabric bales and trim cartons, and cantilever racking or bar holders for long fabric rolls. Long Quyen will recommend the right type based on how your warehouse stores fabric.
How much load can fabric warehouse racking carry?
Each level carries 500 to 2,000 kg depending on the design. Our engineers survey the actual weight of your fabric bales to calculate safe loads and level spacing.
How many levels can the racking have?
Usually 2 to 5 levels, depending on the ceiling height and the handling equipment in use. Level heights are set to the size of the fabric bales so no space is wasted.
Does the racking help protect fabric from mildew?
Yes. When fabric sits on rack levels instead of directly on the floor, moisture from the floor cannot soak into the bales. Wire mesh decking can be chosen for better ventilation.
Besides garment factories, who uses this type of racking?
Textile and dyeing mills with roll-on-tube fabric and wide fabric beams, footwear and handbag warehouses storing leather and synthetic leather rolls, and wholesale fabric stores such as fabric markets, dealers and showrooms.

Optimise Your Warehouse – Boost Efficiency – Cut Costs

Contact us now for a free survey and 3D layout design.

CALL NOW: 0903 422 179

Quick quote

Request a Quote for Fabric Roll Racking

Fill in your details and Long Quyen will respond within 30 minutes (business hours).

See also: experience delivering warehouse racking for FDI factories.