What Is a Catwalk Racking System? Optimal Walkway Racking System for Manual Picking

Industrial Warehousing Special Topic

What Is a Catwalk Racking System?
Multi-Tier Walkway Systems – The Optimal Solution for Warehouse Storage Space

E-commerce Warehousing
Components – Pharmaceuticals
Professional Hand-picking
Multi-tier Catwalk racking system in Long Quyen industrial warehouse
Multi-tier Catwalk racking system – the solution to optimize warehouse height according to industrial standards | Long Quyen Racking

📌
Catwalk Racking (also known as Catwalk Racking System or Rack-supported Mezzanine) is a multi-tier warehouse racking system where walkways are integrated directly onto the rack uprights. This solution maximizes warehouse height for storage models involving small items, numerous SKUs, and requirements for manual hand-picking.

⚡

Quick Summary — TL;DR

40%
Cost-effective compared to traditional independent Mezzanine floors by utilizing the rack frames as support pillars
2–3×
Increases warehouse capacity by dividing vertical space into 2 to 3 storage and operation tiers
500 kg
Maximum design load per m² of walkway; racks support 200 to 800 kg per level
~30 years
Experience in designing, manufacturing, and installing Catwalk racking systems by the Long Quyen team
  • ✅ Specialized for: Component warehouses, pharmaceuticals, libraries, E-commerce fulfillment centers (high-volume small SKUs)
  • ✅ Fire Safety Standards: Perforated steel grating floors allow sprinkler water to penetrate in case of fire
  • ✅ Tier Flexibility: Designed with 2 to 3 walkway levels on the same floor area
  • ✅ High Safety: Handrails, cross bracing, and anti-slip flooring according to occupational safety standards

1. What is Catwalk Racking? Full Technical Definition

Catwalk Racking — also known by international standards as Catwalk Racking System or Rack-supported Mezzanine — is an industrial storage architecture where walkways are designed to be interspersed and tightly integrated with the rack frames, using the rack uprights themselves as the load-bearing structure instead of a separate steel column system.

💡 Easier to visualize:
Imagine a multi-story library where the corridors are attached directly to the bookshelves rather than being built on separate pillars. That is exactly the principle of Catwalk racking in industrial warehouses — the only difference is that instead of books, we store industrial goods with loads up to hundreds of kilograms per compartment.

The term “Catwalk” originally describes narrow elevated paths — like a fashion catwalk — but in the context of industrial warehousing, it refers to narrow walkways (usually 800 mm to 1,200 mm wide) installed at heights of 2.5 meters or more, allowing staff to interact directly with goods on the upper rack levels.

Catwalk walkway with anti-slip grating between rows of industrial medium-duty racking
Catwalk walkway with anti-slip grating — industrial warehouse technical standard | Long Quyen

When should you consider Catwalk racking?

Catwalk racking is the ideal solution when your business faces one of the following issues:

  • The warehouse has a ceiling height of 5 meters or more but is not yet fully utilized
  • Storage of diverse goods with many SKUs and small volumes, where forklifts cannot be used for individual item picking
  • E-commerce business models, central fulfillment (manual order picking)
  • Pharmaceutical, electronic component, or auto part warehouses requiring fast retrieval of individual units
  • Limited budget but a need to increase storage capacity without building a new warehouse

2. Detailed Structure of Catwalk Racking Systems

Unlike building a large floor and then placing racks on top, a Catwalk system is a unified structural block, technically calculated right from the design phase. Each component has its own role and interacts with others to ensure overall safety.

🏗️

Uprights

Medium Duty or Heavy Duty rack columns running continuously from the warehouse floor to the top of the highest tier. This is the “backbone” of the entire system, bearing both the load of the goods on the racks and the load of personnel on the walkways.

🔩

Walkway Beams

Horizontal beams connecting opposite rows of racks to create the framework for the walkway floor. Design load from 250 to 500 kg/m², sufficient to support personnel and hand trolleys.

🔲

Catwalk Decking

Usually made of perforated steel grating, perforated metal sheets, or steel-clad plywood. Anti-slip design is a mandatory requirement. Grating offers superior advantages in terms of light penetration, heat dissipation, and compliance with Sprinkler fire safety standards.

🚪

Pallet Gate

Gates installed at the end of each row on every tier, where forklifts deliver pallets from the ground level. After receiving the goods, staff will unpack and distribute them to individual rack positions by hand.

🪜

Staircases & Handrails

Assembled steel staircases with standard slopes (usually 45°–60°) and protective handrails on both sides of the walkway according to TCVN occupational safety regulations. Minimum handrail height is 1,000 mm.

⚙️

Bracing

Cross bracing and top ties link the rack rows into a rigid block, eliminating sway and increasing overall system stability under dynamic loads.

Staircase for Catwalk racking levels in an industrial small-item storage warehouse
Assembled steel staircase and safety handrails on a multi-tier Catwalk racking system | Long Quyen

3. Operating Principles & Actual Operational Procedures

One of the greatest strengths of the Catwalk system is that the receiving — storage — shipping process is fully optimized. Below is a typical operational flow:

01

Receiving Goods from the Warehouse Floor

Forklifts bring full pallets from the receiving area to the Pallet Gate corresponding to the tier being stocked. Each tier has its own receiving gate, ensuring no interruption to activities on other levels.

02

Unpacking & Sorting on the Tier

Warehouse staff use hand trolleys to transport goods from the receiving gate to the exact rack positions according to the stock-in slip. Walkway widths of 800 mm to 1,200 mm allow trolleys to move comfortably and turn around easily.

03

Storage by SKU Address

Each position on the rack is addressed according to the system: Tier – Row – Bay – Shelf. A Warehouse Management System (WMS) can be integrated to automate the locating and retrieval of goods.

04

Order Picking — Picking Goods by Order

Staff receive a pick list and move along the walkways to collect items from the correct locations. This is a major advantage over forklifts: faster picking speed for individual units, higher accuracy, and no need for overhead forklift clearance space.

05

Shipping — Moving to the Packing Area

Collected goods are brought down via staircases or integrated conveyor systems (if available), then moved to the packing and dispatch area on the ground floor.

4. Practical Applications by Industry — Who is Catwalk Racking For?

Catwalk racking is not a “one-size-fits-all” solution. Below are the industries that benefit most from this system:

🛒

E-commerce & Fulfillment

Thousands of SKUs, individual orders, high picking speeds — Catwalk is the industry standard for parcel distribution centers like GHN, GHTK, and Amazon Logistics.

💊

Pharmaceuticals & Healthcare

Requirements for batch traceability, temperature control, and strict hygiene — Catwalk supports warehouse organization according to GDP/GMP standards, with every medicine box having a clear address.

🔧

Components & Spare Parts

Auto parts and electronic component warehouses needing to organize tens of thousands of items — Catwalk combined with bin shelving is the optimal storage solution.

📚

Libraries & Archives

Bank record archives, public library book storage — the ability to divide multiple walkway tiers helps fully utilize high-ceiling warehouse space.

👗

Apparel & Fashion

Clothing distribution warehouses with thousands of colors and sizes — Catwalk combined with hanging rails and bin shelving allows for scientific organization by SKU.

🏭

Industrial Manufacturing

Manufacturing raw material warehouses with many types of small-sized supplies — Catwalk helps separate storage and production areas vertically, optimizing material flow.

Staff hand-picking items on a Catwalk walkway in an E-commerce warehouse
Hand-picking process on a Catwalk walkway — modern E-commerce warehouse operational standard | Long Quyen

5. Catwalk vs. Independent Mezzanine Floors — Which Solution to Choose?

This is the most common question the Long Quyen engineering team receives. The answer depends on three core factors: operational purpose, investment budget, and required future flexibility.

Comparison Criteria 🏆 Catwalk Racking Independent Mezzanine Floor
Load-bearing mechanism Walkways attached directly to the rack frame, using rack uprights as support pillars Large steel column system, completely independent of the racking
Investment costs ✅ 30–40% savings (no need for a separate floor column system) ❌ Significantly higher due to investment in both floor frame and racking
Installation speed ✅ Faster (modular assembly, no on-site welding required) ❌ Slower, usually requires floor drilling and structural welding
Layout flexibility ⚠️ Fixed to the initial rack layout, difficult to change after installation ✅ Open floor space, allowing for rack rearrangement or office use
Multi-purpose Specialized for storage and order picking ✅ Used for storage, offices, and packing areas simultaneously
Maximum load 200–800 kg/rack level; 250–500 kg/m² walkway ✅ Higher, usually 500–1,500 kg/m² depending on design
Best Suited For Small item warehouses, E-commerce, components (100% manual picking) Multi-functional warehouses, combined with offices and packing areas
💡 Practical Conclusion: If your warehouse is specialized for storage and small item picking, Catwalk racking is the cost-optimal choice. If you need the flexibility to change layouts or combine office space, an independent Mezzanine floor is more suitable. In many large projects, Long Quyen has combined both solutions for different functional areas within the same warehouse.

6. Safety & Fire Prevention Standards (PCCC)

When people move continuously at heights of 3 to 5 meters, safety standards become a non-negotiable factor. Long Quyen’s Catwalk racking systems are designed and tested according to the following standards:

✅
Anti-sway: Cross bracing and top ties link the entire rack array into a rigid structure, completely eliminating vibration when multiple people move simultaneously.
✅
Fire Safety — Sprinkler: Perforated grating floors ensure that water from the Sprinkler system can penetrate to all lower levels in case of fire, meeting TCVN 7336 for automatic fire suppression systems.
✅
Inter-tier Lighting: Perforated floor panels allow artificial light from ceiling fixtures to penetrate to lower levels, reducing lighting system costs and increasing visibility for staff.
✅
Safety Handrails: Steel handrails at least 1,000 mm high surround all walkways, receiving gates, and staircases according to TCVN 4086 for electrical safety in construction and equivalent occupational safety standards.
✅
Anti-slip Flooring: Grating or perforated metal sheets have embossed surfaces with a high friction coefficient, ensuring safety even in high-humidity or oily warehouse environments.
✅
Safety Factor: Long Quyen designs with a safety factor of at least 1.5 times the actual operating load. This means if the declared operating load is 300 kg/m², the structure is designed to support at least 450 kg/m².
Safety handrails and anti-slip grating floor on a Long Quyen Catwalk racking system
Protective handrails and light-penetrating grating floor — fire safety standards for Catwalk racking systems | Long Quyen

7. Technical Specifications to Know When Designing Catwalk Racking

To request an accurate quote and discuss with design engineers, you need to understand the following basic parameters:

Clear Tier Height
2,000 – 2,500 mm
Distance from the lower walkway floor to the underside of the upper support beam
Walkway Width
800 – 1,200 mm
Minimum 800 mm for 1 person; 1,000–1,200 mm for comfortable hand trolley operation
Walkway Load Capacity
250 – 500 kg/m²
Design load including personnel, trolleys, and moving goods
Rack Load per Level
200 – 800 kg
Depending on Medium Duty or Heavy Duty rack type and designed bay size
Number of Walkway Tiers
2 – 3 tiers
Depends on warehouse height; minimum 5 m ceiling height for 2 tiers
Minimum Warehouse Ceiling Height
≥ 5,000 mm
For a 2-tier design. Warehouses 7–8 m high can be designed with 3 walkway tiers
⚠️ Important Note: In addition to the above parameters, engineers also need to know: warehouse floor load capacity, type of goods stored, factory column spacing, door and emergency exit locations, as well as local fire safety requirements. This is why Long Quyen always conducts an on-site survey before providing an estimate.
Pallet Gate for forklifts to deliver goods to upper tiers of the Catwalk racking system
Pallet Gate on an upper tier of a Catwalk system — the receiving point for goods from forklifts | Long Quyen

8. Investment Costs & Actual Profit Analysis

The investment cost for Catwalk racking depends on many factors: warehouse area, number of tiers, design load, floor material type, and finish level. However, there are some guiding principles for estimation:

Mezzanine Floor
Higher costs
  • ⚠️ Requires investment in both the floor structure and the racking system above
  • ⚠️ Usually requires drilling and anchoring columns into the concrete floor
  • ⚠️ Difficult to dismantle, suitable for long-term owned warehouses
  • ✅ More flexible in terms of usage purpose
  • ✅ Design loads are typically higher

Typical Return on Investment (ROI) Analysis

Based on actual implementation experience in Vietnamese warehouses, a typical Catwalk racking project (500 m² warehouse, 2 walkway tiers) usually pays for itself within 18 to 36 months through the following savings:

  • Warehouse Rental Savings: Doubles storage capacity without needing to rent additional floor space
  • Labor Reduction: Scientific warehouse organization by SKU address reduces search and travel time
  • Reduced Damage Rate: Systematic storage instead of random stacking on the floor
  • Increased Order Processing Speed: Optimized picking paths reduce processing time per order

Get Free Catwalk Racking Consultation & Quotation

Long Quyen’s engineering team with nearly 30 years of experience (since 1997) is ready to conduct on-site surveys, design layouts, and provide detailed estimates completely free of charge for your warehouse project.

📞

Consultation Hotline:
0903 422 179 (Mr. Dat) |
0903 412 296 (Mr. Hien) |
0903 434 374 (Mr. Cam)

🏢

Office: 79 Dao Tan, Hanoi | Tel: 84-24-37260098 | Fax: 84-24-32115955

🏭

Factory: Xuan Phuong Industrial Zone, Hanoi
📋 Register to Receive the Latest Quote


9. Frequently Asked Questions (FAQ) — Catwalk Racking

Q
What is Catwalk racking and how does it differ from a standard mezzanine floor?

Catwalk racking is a system of walkways attached directly to the upright frames of the racks, creating an integrated structure between storage racks and multi-tier walkways. The difference from a standard mezzanine floor is that Catwalk does not have a separate floor column system — the rack uprights serve as the floor supports, saving 30 to 40% in costs and allowing for faster installation. A standard mezzanine floor has an independent structure, offering more flexibility in use but at a higher cost.

Q
Can trolleys be used on Catwalk walkways?

Absolutely possible. Catwalk walkways are designed to support loads from 250 to 500 kg/m², allowing staff to use small hand trolleys to collect goods along the aisles. Standard walkway widths of 1,000 to 1,200 mm are sufficient for both people and trolleys to move conveniently. Note that electric forklifts or standard pallet jacks are not permitted on Catwalk walkways as their weight exceeds design limits.

Q
How are heavy goods moved to the upper tiers of the Catwalk?

The Catwalk system is designed with Loading Gates (Pallet Gates) at the end of each row on every tier. Forklifts operating from the ground lift full pallets and place them into these gate areas; staff on the tier then unpack and distribute the goods to individual rack positions by hand. For warehouses with high throughput, inclined conveyor systems or mini freight elevators can be added to speed up transport to upper levels.

Q
Can an existing Selective racking system be converted into a Catwalk?

Yes, but it requires a careful technical assessment. Long Quyen engineers will check if the current rack uprights are capable of supporting the additional load of the walkways and personnel. If the uprights meet the standards, cross beams and walkways can be added to the existing racking to save significant costs. If the old uprights are insufficient, they must be replaced with suitable new ones before installing the walkway system.

Q
What is the minimum warehouse ceiling height for a 2-tier Catwalk system?

To design a practical 2-tier Catwalk system, the clear height of the warehouse should be at least 5.5 meters. Specific calculation: the 1st walkway tier is at a height of approximately 2.5 m (ground floor clear height plus rack height); the 2nd walkway tier is at approximately 5 m; plus a 500 mm to 700 mm safety clearance from the ceiling. Warehouses with ceiling heights of 7 to 8 meters can be designed with a 3rd walkway tier. This is just a guideline — engineers will calculate precisely based on your warehouse’s actual conditions.

Q
What is the best material for Catwalk walkway flooring?

In modern industrial environments, steel grating is the optimal material for several reasons: excellent load-bearing and durability; natural anti-slip surface; light and water penetration (critical for fire safety); good heat dissipation; and ease of cleaning. Perforated metal sheets are a more economical alternative, while steel-clad plywood is suitable for warehouses with specific dust or hygiene requirements, such as pharmaceutical storage.

~30
Years of experience
500+
Completed Projects
ISO 9001
Quality Certification
Nationwide
Installation Coverage