Drive-In Warehouse Shelving Installation Design Estimate

 

Industrial Warehouse Solutions

Estimation – Design – Installation
Industrial Drive-In Racking Systems

Double your storage capacity and save 70–80% of warehouse space — without expanding your footprint.

📌 Quick Answer: Drive-In Racking is a pallet racking system that allows forklifts to drive directly into the rack rows to retrieve or place goods, eliminating the need for aisles between rows. Installation costs range from 1,200,000 – 2,200,000 VND/m² depending on load capacity and materials. Installation time typically takes 3–7 days. Best suited for homogeneous goods, high-volume storage, and where strict FIFO (First-In, First-Out) inventory management is not required.

⚡ TL;DR — 60-Second Summary

  • What is Drive-In Racking? A pallet racking system where forklifts drive through the structure to pick up or store goods.
  • Space Saving: Optimizes 70–80% of warehouse area compared to conventional storage.
  • Reference Cost: 1,200,000 – 2,200,000 VND/m² (excluding VAT and shipping).
  • Load Capacity: 500 – 1,500 kg/pallet depending on design configuration.
  • Installation Time: 3–7 working days (depending on warehouse scale).
  • Warranty: 36 months — ISO 9001:2015 certified.
  • Suitable for: Food, beverages, cold storage, construction materials, and high-volume homogeneous goods.

Get a free quote now →

💰 Drive-In Racking Cost Estimation — Fast & Accurate

Want to set the right budget from the start? Here are 6 factors that determine the total cost of your Drive-In racking project.

6 Factors Affecting Cost Estimation

  1. Warehouse Dimensions — area and ceiling height (directly affecting the number of racking levels).
  2. Load/Pallet — typically 500 – 1,500 kg; heavier loads require thicker steel.
  3. Total Pallets to be stored in the entire warehouse.
  4. Steel Material — powder-coated steel (economical) or galvanized steel (for humid/cold storage environments).
  5. Drive-In Type — single-entry, double-entry, or Drive-Through.
  6. Shipping & Installation Costs — calculated based on distance and project scale.

Reference Price List

Drive-In Racking Type Load Capacity (kg/pallet) Price/m² (VND)
Standard — Powder Coated 1,000 kg 1.200.000 – 1.500.000
Heavy Duty — Powder Coated 1,500 kg 1.500.000 – 1.800.000
Galvanized — Cold/Humid Storage 1,000 kg 1.800.000 – 2.200.000

* Prices do not include VAT and shipping costs. Actual prices depend on site survey results.

💡Budget Tip: Always request the supplier to provide a 3D drawing + detailed itemized estimate before signing the contract. This helps you avoid hidden costs and accurately compare quotes between multiple contractors.

🏗️ ISO 9001:2015 Standard Design & Installation Process

A proper Drive-In racking system requires more than just the right dimensions — it must ensure load safety and stable operation for 10–20 years.

🔧 5 Professional Design Steps

01

Site Survey: Accurately measure warehouse dimensions, check foundation, columns, and floor levelness.

02

Storage Needs Analysis: Determine goods type, pallet weight, turnover cycle, and warehouse management method (LIFO/FIFO).

03

Technical Drawings & 3D Rendering: Optimize layout design, clearly showing each component and future expansion plans.

04

Load & Durability Calculation: Verify structure according to EN 15512 and TCVN standards; ensure minimum safety factors.

05

Proposal Approval & Detailed Estimation: Hand over a complete dossier: technical drawings, itemized estimates, and construction schedule.

Professional Drive-In racking installation at a factory – heavy-duty powder-coated steel racks
Professional Drive-In racking installation at factories — load capacity 1,000 – 1,500 kg/pallet

🔩 5 Safe Installation Steps

01

Site Preparation & Material Gathering: Inspect all components and sort them by rack set before construction.

02

Main Frame Assembly: Secure rack columns to the floor using expansion bolts according to technical drawing coordinates.

03

Installing Support Bars, Bracing & Guide Rails: Forklift guide rails are critical details that protect the racks from impact.

04

Alignment & Leveling Check: Use electronic measuring devices to adjust to a tolerance of less than ±2mm.

05

Handover & Operational Guidance: Train the forklift team, provide warranty documentation, and set a periodic inspection schedule.

30+
Years of experience
500+
Successful projects
36 months
Committed Warranty
ISO 9001:2015
Quality standards

Complete Drive-In racking system at an industrial warehouse – multi-level design for height optimization
Drive-In racking system maximizing warehouse height — common 3–5 level design

📊 Comparing Drive-In Racking with Popular Pallet Racking Types

No single racking type is “best for every warehouse.” The table below helps you choose correctly from the start — avoiding wasted investment.

Criteria 🔵 Drive-In Racking Selective Shelf Double Deep Shelf Push-Back Shelf
Optimize the area ★★★★★ Best ★★ ★★★ ★★★★
Pallet capacity Very high Medium High High
Investment Cost/Pallet Lowest Short Medium High
Loading/Unloading Speed Medium Fastest Fast Fast
FIFO Support ❌ No (LIFO) ✅ Have ⚠️ Restrict ✅ Yes (FIFO)
Diverse SKUs ⚠️ Restrict ✅ Best ⚠️ Average ⚠️ Average
Suitable Industries Food, cold storage, construction materials Multi-industry Goods in large batches Perishable goods, items with expiration dates

✅ Drive-In Racking is SUITABLE if:

  • Goods are homogeneous in size & type
  • Large number of pallets — need to maximize capacity
  • Managed by LIFO principle (Last-In, First-Out)
  • Food, beverage, cold storage, or construction material warehouses
  • Warehouse area is limited but requires high storage volume
  • Budget cost per pallet is low

❌ Drive-In Racking is NOT SUITABLE if:

  • Goods have diverse SKUs and many different types
  • Requires strict FIFO (goods with short shelf life)
  • Need to access any pallet at any time
  • Warehouse height is below 4m
  • Very high turnover speed, continuous throughout the day

Comparing space utilization efficiency between Drive-In and Selective pallet racking
Drive-In racking eliminates most aisles between rows — maximizing storage density

→ Still not sure which racking type fits? Read more: Drive-In vs. Double-Deep Racking: 2025 Comprehensive Comparison

⚠️ Risks to Know Before Investing in Drive-In Racking

We believe in transparency. Here are the practical limitations and risk mitigation strategies — to help you make the best decision.

🔶

Forklift Collision Risk

Forklifts operating inside the racks may hit columns if drivers are unfamiliar with the layout. Solution: Install column guards and floor guide markings.

🔶

Limited Stock Rotation

Drive-In racking operates on the LIFO principle — not suitable for goods with short shelf lives. Solution: If FIFO is required, consider Drive-Through or Flow racking.

🔶

Dependence on Forklift Dimensions

Rack width must precisely match forklift specifications. Changing forklifts later may require rack adjustments. Solution: Provide forklift specifications during the design phase.

🔶

Estimation Discrepancies Without Site Survey

Online quotes are for reference only. Actual prices may vary by 10–20% due to foundation conditions and warehouse terrain. Solution: Request a free on-site survey before signing a contract.

🔶

Insufficient Warehouse Height

Drive-In racking is most effective in warehouses with ceiling heights of 5m or more. Warehouses lower than 4m often lack enough space for forklift operation. Solution: Measure actual height + calculate forklift lift height in advance.

🔶

Non-routine maintenance

Racks that are not periodically inspected may develop component faults that go undetected. Solution: Perform inspections every 6 months; replace damaged components immediately.

⚡ Expert Note: Properly designed and installed Drive-In racking has a lifespan of 15–20 years. All the above risks can be prevented with standard design and proper operational procedures. Contact Long Quyen engineers for a free, no-obligation consultation.

🏆 Why Do Over 500 Businesses Choose Long Quyen Racking?

🎓

30 Years of Expertise

A team of engineers with nearly 30 years of experience in designing and installing industrial warehouse racking in Vietnam.

📐

Turnkey Design

From surveys, 3D drawings, and estimates to construction and handover — a single point of contact.

🛡️

36-Month Warranty

Committed 36-month warranty on all components — the longest in the industry in Vietnam.

✅

ISO 9001:2015 Standard

Production and installation processes with quality control according to international management standards.

🔍

Free Site Survey

Engineers visit your warehouse to perform on-site measurements and consult on solutions — completely free of charge.

🏭

Manufactured in Hanoi

Factory located in Xuan Phuong Industrial Zone, Hanoi — proactive supply chain, fast nationwide delivery.

Long Quyen technicians installing Drive-In racking at an industrial manufacturing plant
Long Quyen technical team installing Drive-In racking at a factory — ISO standard process

❓ Frequently Asked Questions about Drive-In Racking

The most common questions from customers — answered concisely and accurately.

How much does it cost to install Drive-In warehouse racking?

The cost of installing Drive-In racking depends on load capacity, material, and warehouse area. Reference prices range from 1,200,000 VND/m² (standard) to 2,200,000 VND/m² (galvanized, cold storage). The above prices do not include VAT and shipping fees. Contact us for an accurate quote after a free site survey.

Is Drive-In racking suitable for cold storage and humid environments?

Have. The hot-dip galvanized version of Drive-In racking is specifically designed for cold storage, seafood warehouses, and high-humidity environments. It offers superior corrosion resistance compared to standard powder coating, with a lifespan exceeding 15–20 years in harsh conditions.

Which forklifts are suitable for operating Drive-In racking?

Drive-In racking is compatible with Counterbalance forklifts (most common) and Reach Trucks with appropriate width and lift height. Forklift dimensions (mast width, maximum lift height) must be provided before design to ensure safe clearance within the racks.

How long does it take to install Drive-In racking?

Installation typically takes 3 to 7 working days depending on the warehouse area and number of racks. Small warehouses under 500m² are usually completed in 3–4 days. Large warehouses or complex configuration requirements may take 7–14 days. Long Quyen commits to the schedule as per the contract.

Can Drive-In racking be expanded or reconfigured after installation?

Have. Drive-In racking uses a standard modular component system — allowing for additional rows, increased levels, or height adjustments based on actual needs. Condition: expansions must be compatible with the original design specifications and inspected by an engineer before construction.

Ready to optimize your warehouse?

Receive design consultation + free quote within 24 working hours.
Engineers will conduct an on-site survey — no fee, no obligation.

📞

Racking Consultation Hotline: 0903 422 179 (Mr. Dat)

0903 412 296 (Mr. Hien)

0903 434 374 (Mr. Cam)

🏢

Hanoi Office: 79 Dao Tan St., Giang Vo Ward, Hanoi

84-24-37260098 | Fax: 84-24-32115955

🏭

Manufacturing Plant: Xuan Phuong Industrial Zone, Hanoi

📋 Register to Receive the Latest Quote