Roll-Out Mold Racks at My Technology Company – High Storage Density, Molds Retrieved in One Move
Long Quyen supplied and installed a roll-out mold rack system (also known as pulley racking) for My Technology Company’s factory. Designed for heavy, oversized molds and tools, it lets each drawer slide out individually for positioning and retrieval instead of clearing an entire stack.
My Technology Roll-Out Mold Rack Project Overview
The project focused on one goal: increasing mold storage density without slowing down production.
Customer
My Technology Company – an industrial manufacturer needing a dedicated storage area for molds and tools.
Scope
Drawer-type roll-out mold racks with a modular structure connecting multiple bays.
Requirements
Hold heavy, oversized molds; quick positioning and retrieval; safe for operators.
Long Quyen’s role
Load configuration advice, manufacturing to ISO procedures and the 5S method, transport and assembly by the company’s engineering team.
The Mold Store Problem Before the Roll-Out Racks
Heavy molds and tools left loose on the shop floor always create three problems at once: cramped, slow and unsafe.
Low storage density
Large molds could only be stored in one layer on the floor, leaving most of the store’s volume unused.
Time lost searching and moving
With no fixed place for each mold set, every changeover meant searching and moving molds around.
Tools easily damaged
Molds and tools placed on the floor gathered dust and were knocked during moves, affecting mold surface quality.
Risk of workplace accidents
Lifting and pulling heavy items without a purpose-built structure is a constant risk in the production area.
Roll-Out Mold Rack Specifications
Standard configuration of the roll-out mold rack range manufactured by Long Quyen.
| Load capacity | 1,000–3,000 kg per drawer; selectable mold rack range from 500 kg to 5,000 kg |
| Dimensions | Rack heights from 1,500 mm to 2,100 mm to customer requirements |
| Levels | 4–8 roll-out drawers for sorting molds and tools |
| Material | 2 mm cold-rolled steel plate |
| Finish | Powder-coated or galvanized; blue, white, green, orange-yellow or custom colors |
| Accessories | Uprights, beams, drawers sliding on rails |
| Safety | Heavy-duty steel structure that does not warp; mold cradles limit impacts and dust |
| Installation | Uprights and beams pack compactly for easy transport; assembled by skilled engineers |
Loads and structure are calculated according to international practice for pallet racking systems.
Long Quyen’s Solution
Long Quyen chooses the configuration based on the customer’s actual mold weights rather than applying one template to every store.
Load selected by mold group
Molds are grouped by weight, then a configuration is chosen within the 500–5,000 kg range to avoid both over- and under-sizing.
Sliding drawers for quick positioning
Slide the drawer out to reach the required mold directly, without squeezing between rack rows.
Modular connected structure
The design allows bays to be added or removed in series, adapting to storage needs at each stage.
Manufactured to ISO and 5S
A standardized production process controls steel quality, joints and an even powder coat.
Results After Putting the Roll-Out Mold Racks Into Use
My Technology Company’s mold storage area now runs noticeably tidier and safer.
Up to 70% space saved
Storing molds on several drawer levels freed most of the floor area previously used for mold stacking.
Higher productivity
Less time spent searching for and moving molds, shortening line changeovers.
Lower accident risk
Molds and tools sit securely on a load-bearing structure instead of being piled loose in the production area.
Protecting molds and tools
Dedicated cradles limit impacts and dust, keeping mold surface quality more consistent.
Photos of Long Quyen Roll-Out Mold Racks
Photos of roll-out mold racks and other industrial racking manufactured and installed by Long Quyen.



Why Choose Long Quyen?
A factory with nearly 30 years
We manufacture directly at our Xuan Phuong factory in Hanoi – no middlemen, factory-direct prices.
Free 3D layout design
Warehouse survey, 3D drawings and load calculations free of charge before quoting.
Nationwide installation
A professional installation team delivering on schedule throughout Vietnam.
European standards
High-quality steel, powder coating and load testing to FEM/SEMA standards.
Long-term warranty
24–60 month warranty (depending on rack type and accessories), scheduled maintenance and fast replacement parts.
Trusted by 500+ businesses
Partner to leading logistics, manufacturing and distribution companies in Vietnam.
Project Delivery Process
Contact
Needs assessment and initial advice
Survey
Free on-site warehouse measurement
Design
3D layout drawing + quotation
Manufacturing
Fabrication at our Hanoi factory
Installation
Installation, load acceptance testing
Warranty
Long-term scheduled maintenance
Frequently Asked Questions About Roll-Out Mold Racks
How is a roll-out mold rack different from ordinary storage racking?
What load range can mold racks handle?
Can mold racks be expanded as needs grow?
Which industries use roll-out mold racks?
Is transporting and installing mold racks complicated?
Optimize Your Warehouse – Boost Efficiency – Cut Costs
Contact us now for a free survey and 3D layout design.
Request a Quote for Roll-Out Mold Racks
Fill in your details and Long Quyen will reply within 30 minutes (business hours).