What is a mezzanine floor? Structure and application

A mezzanine floor is an intermediate steel platform built inside a building, between the main floor and the roof, to create extra usable floor area without new construction. In warehouses and factories, an industrial mezzanine floor typically adds 50–100% more space for storage, picking, offices or production at a fraction of the cost of building expansion.

Steel mezzanine floor in an industrial warehouse (Ferroli project)
Steel mezzanine floor in an industrial warehouse (Ferroli project)

This guide covers the types of warehouse mezzanine floor, the main mezzanine floor components and their typical specifications, how to design one safely, what it costs to build and how installation works — so you can judge whether a mezzanine platform is the right way to add space to your factory or warehouse in Vietnam.

What is a mezzanine floor in a warehouse?

Most industrial buildings in Vietnam have 8–12 m of clear height, but goods and people only use the bottom 2–3 m. A warehouse mezzanine floor uses that empty air space: a free-standing steel structure of columns, beams and decking creates a second (sometimes third) level, reached by stairs and served by a pallet gate or goods lift. Because it is bolted, not built into the building, a mezzanine can be extended, relocated or removed later.

Types of industrial mezzanine floor

TypeHow it is supportedBest for
Free-standing (structural) mezzanineIts own steel columns and beams, independent of racksOffices, packing, production, storage of light goods; open floor below
Rack-supported mezzanineThe racking uprights carry the upper floorMulti-level picking of small parts and cartons; very space-efficient
Shelving-supported mezzanine (multi-tier)Medium-duty shelving frames carry walkwaysSpare parts, e-commerce, archives with 2–3 picking levels
Catwalk mezzanineNarrow walkways between rack runsUpper-level picking access with minimum steel

Long Quyen supplies all four types; see our mezzanine floor products and the wider range of warehouse structures.

Free-standing or rack-supported: how to choose

Choose a free-standing mezzanine when you need an open floor below (for forklifts, packing benches or production) or when the upper level is an office or work area. Choose a rack-supported or shelving-supported mezzanine when both levels are used for storage and picking: the racking does double duty as structure, so steel use per m² is lower and the layout is very dense. If the building has limited clear height or weak floor areas, a free-standing design with a wider column grid and larger base plates is usually easier to approve. Many projects combine both — a rack-supported picking module next to a free-standing platform for packing and offices.

3D design of a warehouse mezzanine floor
3D design of a warehouse mezzanine floor

Mezzanine floor components and typical specifications

ComponentFunctionTypical specification
ColumnsCarry the floor load to the slabSquare/rectangular hollow section or H-section; grid 3–6 m
Main beams and secondary beams (joists)Span between columns and support the deckI/H-beams or cold-formed C/Z sections; depth sized to span and load
DeckingWalking/working surfaceSteel chequer plate, steel grating, or 18–38 mm high-density particle board on steel profiles
Base plates and anchorsFix columns and spread loadPlate size from column load; chemical or mechanical anchors
StairsPersonnel accessWidth ≥ 900–1,000 mm, with handrails and anti-slip treads
Handrails, kick platesEdge protectionRail height about 1,100 mm with mid-rail and toe board
Pallet gate / goods liftSafe loading of goods to the upper levelSwing or up-and-over gate; goods lift for frequent loads
Fire protection (as required)Fire resistance and sprinklers under the deckPer local fire authority (PCCC) review

Design loads and dimensions

Typical uniformly distributed design loads are 250–350 kg/m² for offices and light storage, 500 kg/m² for general storage and up to 1,000 kg/m² or more for heavy goods or pallet use. Clear height under the deck is usually 2.4–3.0 m so people and hand trucks move comfortably below, leaving a similar height above. The column grid is a trade-off: wider spacing gives a more open floor below but needs heavier beams.

Detailed structure of mezzanine floor components
Detailed structure of mezzanine floor components

Applications of warehouse mezzanine floors

  • Extra storage: cartons, spare parts and light goods on shelving above, with pallet racking or staging below.
  • E-commerce and picking: multi-level pick zones close to packing stations.
  • Production and assembly: light assembly, kitting or quality-control areas above the production line.
  • Offices in the warehouse: supervisors’ offices, meeting rooms and break areas with a view of the floor.
  • Archives and records: high-density file storage for hospitals, banks and public bodies.
Mezzanine floor for an e-commerce warehouse
Mezzanine floor for an e-commerce warehouse

Advantages and limitations

AdvantagesLimitations
Adds 50–100% usable area without building expansion or new permits for a new buildingRequires adequate clear height (ideally ≥ 5.5–6 m)
Much faster and cheaper than construction: weeks, not monthsNeeds fire-safety review: sprinklers, escape routes, fire rating where required
Demountable and reusable; can be extended or relocatedFloor slab must carry the column point loads
Keeps operations under one roof, shortening travelGoods lifting to the upper level must be planned (gate, conveyor or lift)

Mezzanine floor vs other ways to gain space

OptionSpace gainedLead timeFlexibility
Mezzanine platform+50–100% floor area2–6 weeksHigh – demountable
Higher pallet rackingMore pallet positions, not floor area2–4 weeksHigh
Building extensionAs designedMonths, permits neededLow
Renting extra warehouseAs rentedImmediate, but recurring costMedium

Design and safety considerations

  • Structural design: mezzanine steelwork should be designed to recognised structural codes (e.g. Vietnamese TCVN, Eurocode or AISC) by a qualified engineer, with load signs showing the permitted kg/m².
  • Floor slab check: verify column point loads against slab thickness and concrete strength; add larger base plates or footings if needed.
  • Fire safety: discuss sprinklers under the deck, emergency lighting, escape distances and number of stairs with the fire authority before fabrication.
  • Edge protection: continuous handrails, mid-rails and kick plates on all open edges; safety gates at loading points.
  • Lighting and services: plan lighting, electrical and ventilation under and above the deck.
  • Inspections: check bolts, anchors, decking and handrails periodically and after any impact.
Mezzanine floor with storage shelving at the Goldsun warehouse
Mezzanine floor with storage shelving at the Goldsun warehouse

How to plan a mezzanine floor: 6 key questions

  1. What will happen on the upper level? Storage, picking, offices and production need different design loads, lighting and fire measures.
  2. How will goods go up and down? Hand-carried cartons need only stairs; pallets need a pallet gate served by a forklift; frequent flows justify a goods lift or a conveyor.
  3. What must stay free below? Mark forklift routes, dock doors, sprinkler mains and electrical panels so columns avoid them.
  4. How many people will work above? This sets the number and width of stairs and escape routes.
  5. Will you expand later? Choosing a column grid and deck level that can be extended saves cost in phase two.
  6. What does the floor slab allow? Slab capacity often decides the column grid and base-plate size.

Common mistakes to avoid

  • Designing for today’s light load, then storing heavier goods on the deck later — always size for realistic future use and post load signs.
  • Placing columns in the middle of forklift routes or in front of doors and fire hose reels.
  • Forgetting sprinkler extension and emergency lighting under the deck until after installation.
  • Leaving open edges without kick plates, so cartons or tools fall onto people below.
  • Using a single narrow stair for a busy picking floor, which becomes a bottleneck and an escape-route issue.

Long Quyen engineers review these points during the free survey and include them in the drawings, so the mezzanine passes inspection and works efficiently from day one.

What affects the cost of a mezzanine floor?

Mezzanine costs are calculated per project, so Long Quyen quotes from your layout. The main factors are the floor area, design load (kg/m²), column grid and span, decking type, number of stairs and gates, goods lift or conveyor, fire-protection requirements and finishing (painting or galvanising). Higher loads and wider column spacing need heavier steel and increase cost per m².

Installation process

  1. Survey – measure clear height, columns, sprinklers, lighting and slab condition.
  2. Concept and load definition – agree use, design load, stairs, gates and goods flow.
  3. Engineering and drawings – structural calculations, 2D/3D drawings for approval.
  4. Fabrication – cutting, welding, drilling and painting of steelwork at the factory.
  5. Erection – columns, beams, decking, stairs and handrails, usually 1–3 weeks on site.
  6. Handover – inspection, load signs and as-built documentation.
Mezzanine floor structure and application
Mezzanine floor structure and application

FAQ

How much load can a mezzanine floor carry?

It is designed for your use: typically 250–350 kg/m² for offices and light storage, 500 kg/m² for general storage, and 1,000 kg/m² or more for heavy goods.

What clear height do I need for a mezzanine?

Around 5.5–6 m of building clear height allows comfortable working height both below and above the deck (about 2.4–3.0 m each).

What decking is best for a warehouse mezzanine?

Particle board on steel profiles is economical for storage and offices; steel chequer plate suits heavy wear; steel grating lets light and sprinkler water pass through.

Does a mezzanine floor need fire-safety approval?

Usually yes. Sprinklers below the deck, escape routes and stairs must be reviewed with the fire authority before installation.

How long does it take to install a mezzanine platform?

From approved drawings, fabrication and installation typically take 3–6 weeks, with 1–3 weeks on site depending on size.

Can a mezzanine floor be moved later?

Yes. Bolted mezzanines can be dismantled, modified or relocated, which is a key advantage over concrete construction.

Plan your mezzanine floor with Long Quyen

Since 1997, Long Quyen has delivered 500+ warehouse projects in Vietnam, including mezzanine floors for factories, logistics centres and e-commerce warehouses. Our steelwork is produced under an ISO 9001:2015 quality system, with a warranty of 24–60 months depending on the system. Call 0903 422 179 or contact us for a free site survey and layout. Related reading: double deep pallet racking guide and pallet racking systems.