Racking selection guide
How to Choose Forklift-Compatible Warehouse Racking – Avoid Costly Mistakes
One of the most common mistakes when buying warehouse racking is not checking compatibility with existing forklifts. Racking and forklifts must be designed together — otherwise forklifts cannot enter the racking or reach the top level, wasting a large investment.
Racking–forklift compatibility matrix
| Racking type | Suitable forklift | Minimum aisle width | Notes |
|---|---|---|---|
| Standard selective | Standard 4-wheel counterbalance forklift | 3.5–4.5 m | Most popular, most flexible |
| Double deep | Double-deep reach truck | 2.7–3.2 m | Requires a dedicated reach truck |
| Drive-in | Specialized low-mast forklift | No separate aisles required | Forklift drives into the racking |
| Push-back | Standard forklift or reach truck | 3.0–3.5 m | No special vehicle required |
| Very narrow aisle (VNA) | Dedicated VNA truck + guide rails | 1.5–1.8 m | Very high forklift cost |
| Mezzanine | No forklift required (stairs) | Not applicable | Manual picking on the mezzanine floor |
Need advice on choosing the right racking?
Long Quyen engineers analyze your actual warehouse operation and propose the optimal solution free of charge.
Forklift specifications to provide when designing racking
- Forklift model: so Long Quyen can look up exact specifications in the manufacturer’s catalog
- Maximum lifting capacity (kg)
- Maximum lift height (mm) — determines how many racking levels can be installed
- Overall truck width (mm) — determines the minimum aisle width
- Minimum turning radius (mm) — determines the main aisle width
- Fork spread (mm) — must be smaller than the beam span in the racking
Common forklift and racking mistakes
- Buying 6-level selective racking when the forklift can only reach level 4
- Designing 3 m aisles when the forklift needs 3.8 m to turn
- Buying double-deep racking without a reach truck and using a standard forklift — the rear pallets cannot be retrieved
- Beam span smaller than the fork spread — pallets cannot be placed
Frequently asked questions
Can a standard forklift drive into drive-in racking?
No. Drive-in racking requires a low-mast forklift to travel deep into the racking without hitting the overhead beams. Standard forklifts can only be used with selective racking.
What is the minimum aisle width for a standard 4-wheel forklift?
A standard 4-wheel forklift (2–3 tonne capacity) needs a minimum aisle of 3.5 m. A reach truck needs 2.7–3 m. A VNA (very narrow aisle) truck needs only 1.5–1.8 m but requires guide rails.
Should you buy the racking or the forklift first?
Decide on the forklift type first, then design compatible racking. The forklift’s specifications (fork spread, turning radius, lift height) determine the racking type, level heights and aisle width.
Need advice on choosing the right racking?
Long Quyen engineers analyze your actual warehouse operation and propose the optimal solution free of charge.
Further reading: Pallet racking – Wikipedia