Standard Warehouse Design Guide from A-Z 2025 | Long Quyen

Standard warehouse design guide from A-Z – 30 years of experience in Long Quyen

Non-standard warehouse design is the leading cause of space waste, operational bottlenecks, and labor safety. This article summarizes 6 steps of standard warehouse design from Long Quyen’s practical experience through more than 500 warehouse projects in Vietnam.

Installation Instructions

Step 1 — Analyze the goods and operating models

Before drawing any drawing, it is necessary to answer 5 core questions:

  • How much does the goods weigh per pallet or kg/carton?
  • How many SKUs are there? What is the turnover rate of each SKU?
  • Frequency of import and export: how many pallets/hour?
  • Require FIFO or LIFO? Do goods have an expiration date?
  • Existing equipment: what kind of forklift, maximum lifting height?

Step 2 — Measurement and analysis of the warehouse site

  • Clearance height: Measured from the floor to the bottom of the lowest crossbar. This is the actual height that can be stacked on the shelf.
  • Structural Column Position: The distance between the columns determines the length of the shelf row.
  • Doors, gates, and emergency exits: Do not obscure by shelves.
  • Floor Load: Must be sufficient to bear the load of shelves + goods + forklifts (usually 3–5 tons/m²).
  • Fire protection system: Sprinkler, smoke detector—affects maximum shelf height.

Step 3 — Choose the right type of shelf

Warehouse conditionsRecommended shelf types
Multiple SKUs, frequent imports and exportsSelective Pallet Racking
Less SKU, bulk storage, cold storageDrive-In Racking
Need high speed, 100–300 SKUsPush-Back Shelf
FIFO mandatory, expiration dateFlow Rack/Selective Rack
Low warehouse, need more spaceMezzanine Floor
Long Row: Iron, Pipe, Wood SheetCantilever rack
Small, diverse, hand pickingMedium Load Shelf + Supply Box

Step 4 — Warehouse layout design

Warehouse layout basics:

  • Main aisle: 3.5–4.5m wide for standard 4-wheel forklifts
  • Cross aisle: 2.5–3m wide, dividing the shelves into blocks
  • Receiving and exporting areas: do not overlap, priority is given to 2 warehouses
  • Bulk shipments are placed near the exit gate—reducing travel distance
  • Reserve 10–15% of the area for future expansion

Step 5 — Load Calculation and Specifications

Long Quyen provides free Selective and Drive-In shelf design calculation tools:

Step 6 — Warehouse Safety Standards

  • Shelves must be attached with a maximum load plate on each floor
  • Install column protectors at any location where the forklift may collide.
  • Clearance between cargo top and beam bottom: 75mm minimum (FEM standard)
  • Periodic shelf inspection every 6 months according to SEMA/FEM 10.2.02
  • Do not load more than the design load under any circumstances

Need advice on choosing the right type of shelf?

Engineer Long Quyen analyzes the actual warehouse model and proposes the optimal solution for free.

Frequently Asked Questions

How long does warehouse design take?

Preliminary 2D drawings: 1–2 days after the site survey. Full detailed 3D drawings: 3–5 days. Long Quyen designs warehouse drawings free of charge when you buy racking.

How much does warehouse design cost?

Long Quyen provides free warehouse layout design, 2D/3D drawings and rack-type consultation when you sign a racking purchase contract. This is one of the advantages of buying directly from the manufacturer.

What is the minimum warehouse height for installing pallet racking?

3-level selective racking needs a minimum clear height of 5 m (4 m rack + 1 m safety clearance). 5-level racking needs 8–9 m. Long Quyen calculates precisely based on the actual height of your warehouse.

Need advice on choosing the right type of shelf?

Engineer Long Quyen analyzes the actual warehouse model and proposes the optimal solution for free.