Warehouse racking is a steel storage structure — upright frames, beams or arms, and accessories — that stores goods vertically in a warehouse so they can be put away and picked safely by hand, forklift or automated equipment. A well-designed warehouse racking system multiplies storage capacity, organises stock by location and speeds up order picking.
This guide explains the main types of warehouse rack, how to match a racking system to your goods, forklifts and building, typical specifications, safety standards and the steps from design to installation — with a focus on industrial warehouses in Vietnam.
What is a warehouse racking system?
A warehouse racking system is more than shelves: it is an engineered structure designed for specific loads, handling equipment and building conditions. It consists of upright frames (columns with bracing), load-carrying members (beams, cantilever arms or rails), connections (beam connectors with safety locks, base plates and anchors) and accessories (decking, pallet supports, guards, signs). Racking is classified by load (light, medium, heavy duty) and by how goods are stored and accessed.
Main types of warehouse racking
| Type | How it stores goods | Typical load | Best for |
|---|---|---|---|
| Selective pallet racking | Pallets one deep, every pallet accessible | 500–1,500 kg/pallet | Most warehouses; many SKUs |
| Double deep racking | Pallets two deep, reach truck with double-deep forks | 500–1,500 kg/pallet | More density with good selectivity |
| Drive-in racking | Forklift drives into deep lanes | 500–1,500 kg/pallet | Few SKUs, many pallets, cold stores |
| Push-back racking | Pallets on carts pushed back on inclined rails | up to ~1,000–1,500 kg/pallet | High density, LIFO per lane |
| VNA narrow-aisle racking | Very narrow aisles with guided trucks | 500–1,500 kg/pallet | Tall buildings, many SKUs |
| Mobile racking | Racks on motorised bases; one moving aisle | Pallets or shelves | Cold stores, archives, expensive space |
| Cantilever racking | Arms without front columns | Long goods: steel, pipes, timber | Long and bulky items |
| Longspan shelving | Hand-loaded beams with decking | 200–1,000 kg/level | Cartons, spare parts |
| Medium-duty shelving | Hand-loaded bolted or boltless shelves | 150–500 kg/level | Components, small parts, e-commerce |
| Mezzanine / multi-tier | Extra floor levels above racking | 250–1,000 kg/m² | Adding floor area for picking or offices |
Classification by load
- Light-duty shelving (up to ~150 kg per level): slotted-angle or boltless shelves for documents, tools and small items.
- Medium-duty shelving (about 150–500 kg per level): hand-loaded shelving for cartons and parts.
- Heavy-duty racking (500 kg to several tonnes per level): pallet racking, cantilever and mobile systems handled by forklifts.
Classification of industrial warehouses and the racking they need
| Warehouse type | Typical goods | Recommended racking |
|---|---|---|
| Raw material warehouse | Coils, bags, drums, sheets, pallets of inputs | Selective, cantilever, coil racks, drum racks |
| Production (WIP) warehouse | Components, semi-finished parts | Medium-duty shelving, carton flow, selective |
| Finished goods warehouse | Palletised products | Selective, double deep, drive-in, push-back |
| Distribution / 3PL centre | Many SKUs, mixed pallets and cartons | Selective, VNA, carton flow, mezzanine picking |
| Cold storage | Frozen and chilled food, pharma | Drive-in, mobile racking, galvanised selective |
| Spare-parts and e-commerce warehouse | Small items, many SKUs | Shelving, multi-tier mezzanine, bin racks |
| Archive / records store | Files, boxes | Mobile shelving, library shelving |
How to choose the right warehouse racking system
- Profile your stock: number of SKUs, pallets per SKU, unit loads (pallet, carton, long goods) and weights.
- Define throughput and rotation: pallets in/out per day and whether FIFO/FEFO is mandatory.
- Check the building: clear height, column grid, doors, sprinklers, lighting and floor slab capacity.
- Select handling equipment: counterbalance forklift, reach truck, VNA truck or manual picking — this sets aisle widths and rack height.
- Compare layouts: calculate positions, aisle area and cost per position for 2–3 alternatives.
- Plan for growth: leave room for extra bays, levels or a mezzanine later.
As a rule of thumb: many SKUs with few pallets each → selective racking; many pallets per SKU → double deep, push-back or drive-in; long goods → cantilever; hand-picked cartons and parts → shelving or longspan; expensive space or cold stores → mobile racking.
Typical specifications to know
| Parameter | Typical range |
|---|---|
| Rack height | 2–4 m for shelving; 6–12 m for pallet racking |
| Load per pallet | 500–1,500 kg (heavier on request) |
| Load per shelf level (hand-loaded) | 150–1,000 kg |
| Aisle width | 3.5–4.0 m counterbalance; 2.8–3.2 m reach truck; 1.6–1.9 m VNA; 0.9–1.2 m manual picking |
| Steel finish | Powder coating (standard); hot-dip galvanising for cold or humid environments |
| Beam adjustment pitch | 50–76 mm |
Benefits of a well-designed warehouse racking system
- More capacity in the same building: using height and the right racking type often doubles or triples storage compared with floor stacking.
- Faster, more accurate picking: every location has an address, which supports WMS, barcode scanning and FIFO/FEFO control.
- Less damage: goods are not crushed by stacking, and forklift paths are clear and predictable.
- Safer work: engineered loads, safety locks, guards and load signs reduce the risk of collapse and injury.
- Flexible growth: standard components can be extended, re-levelled or relocated as the business changes.
Common mistakes when buying warehouse racking
- Choosing racking from a catalogue before defining pallet weights, SKUs and forklift type — the result is often over- or under-designed steel.
- Ignoring the floor slab: racks are only as safe as the concrete under the base plates.
- Designing aisles for a forklift you do not own, or buying a truck that cannot reach the top level.
- Forgetting sprinklers, lighting and fire-escape routes until after installation.
- Skipping column guards and load signs to save cost — the most common causes of rack damage are impacts and overloading.
- Comparing quotes by price per tonne of steel instead of price per usable pallet position.
Racking for Vietnam’s climate and building types
Most industrial buildings in Vietnam’s industrial parks are steel-frame sheds with 8–12 m clear height and slabs of varying quality, in a hot and humid climate. Powder-coated racking performs well in normal dry warehouses; for cold stores, food processing, coastal locations or semi-open sheds, hot-dip galvanised components resist corrosion better. Floor checks are especially important in older or converted buildings, and seasonal humidity should be considered when storing paper, textiles or electronics.
Essential warehouse racking accessories
Accessories turn a basic warehouse rack into a safe, efficient system. The most useful are wire mesh decking for cartons and non-standard pallets; pallet support bars; row spacers and wall ties for stability; column guards, upright protectors and end-of-aisle barriers against forklift impact; anti-collapse mesh on racks facing walkways; location labels and aisle signs for fast picking; and load notices showing permitted loads per level and per bay. Long Quyen manufactures these in-house so they match the racking exactly — see our racking accessories.
Design and safety standards
Pallet racking should be designed to a recognised standard such as EN 15512 / FEM 10.2.02 or RMI (ANSI MH16.1), and installed, used and inspected in line with EN 15635. In practice this means: calculations for frames, beams and connectors from real load data; checking the floor slab; beam safety locks; column guards and end barriers; load signs at every run; and a documented inspection routine (daily visual checks, periodic checks by a trained person and an annual expert inspection). In Vietnam, sprinkler layout and fire-escape routes should also be agreed with the fire authority.
What affects the cost of warehouse racking?
Long Quyen quotes each warehouse racking system from your layout. Cost depends mainly on the racking type, height and number of levels, load per position, total positions, steel finish (powder coating or galvanising), accessories (decking, guards, signs) and installation conditions. A good layout often lowers cost per pallet position more than any change in steel price.
From design to installation
- Free site survey and data collection.
- Layout options with 2D/3D drawings and capacity comparison.
- Engineering calculations and final drawings.
- Manufacturing at Long Quyen’s factory in Hanoi (roll-forming, punching, welding, powder coating).
- Installation by our own teams, inspection, load signs and handover with operator training.
FAQ
What is the difference between a warehouse rack and shelving?
Racking usually means heavy-duty, forklift-served structures for pallets or long goods; shelving is lighter, hand-loaded storage for cartons and small items. Both are part of a warehouse racking system.
What is the most common type of warehouse racking?
Selective pallet racking, because it gives access to every pallet, works with standard forklifts and has the lowest cost per position.
How high can warehouse racking be?
Pallet racking commonly reaches 6–12 m; very-narrow-aisle and automated systems can go higher if the building and floor allow.
How often should warehouse racking be inspected?
Operators should check daily, a trained person periodically (often monthly), and a competent inspector at least once a year, following EN 15635 practice.
Can warehouse racking be relocated or extended?
Yes. Bolted racking components are standard and can be extended, reconfigured or moved, subject to an engineering check of the new layout.
Talk to a warehouse racking manufacturer
Long Quyen has designed, manufactured and installed warehouse racking in Vietnam since 1997 — nearly 30 years and 500+ projects. Our products are made under an ISO 9001:2015 quality system with a warranty of 24–60 months depending on rack type and accessories. Call 0903 422 179 or contact us for a free site survey. Explore pallet racking, industrial shelving and warehouse structures.