Roller Pallet Rack Flow Rack Storage Warehouse Packaging & Packaging

1. Overview of Flow Rack in Packaging & Packaging Warehouse

1.1. Flow Rack Roller Pallet Rack Concept

Flow Rack is a type of pallet rack that integrates a roller conveyor system according to a certain slope. When goods (usually on pallets) are placed on the high end of the shelf, the pallet automatically slides down to the lower side thanks to gravity. Each time a pallet is taken away, the rear pallet will “run” down to the position ready for the next shipment.

In this way, the Flow Rack creates a continuous and circular flow of goods. The mechanism is based on the principle of first in – first out (FIFO), helping to control the expiration date, product life cycle and inventory easily.

Flow Rack Roller Pallet Racking System Storage Packaging According To FIFO Principle
Flow Rack Roller Pallet Racking System Storage Packaging According To FIFO Principle

1.2. The Importance of Flow Rack in the Packaging & Packaging Industry

While packaging is greatly affected by environmental factors (temperature, humidity, impact, etc.) and has frequent import and export needs, Flow Rack possesses a number of suitable characteristics:

  • FIFO Compliance: Packaging may deteriorate or lose quality over time. The “first-in-first-out – first-out” ensures that the new shipment is not “buried” after the old shipment, optimizing the circulation cycle.
  • Space and manpower saving: When the front pallet is taken away, the rear pallet automatically advances. Warehouse workers do not need to unload or move as many times as some other types of shelves.
  • Minimize damage: Thanks to the standard design roller system, the pallet moves smoothly, limiting impact and scratches. Especially important with paper packaging, plastic film, fragile bottles.
The Importance of Roller Pallet Racking Packaging & Packaging
The Importance of Roller Pallet Racking Packaging & Packaging

2. Design and Structure Features of Flow Rack

2.1. Main Ingredients

  1. Frame
    • Made from high-strength steel, powder coated or galvanized, ensuring load capacity and durability.
  2. Beams and roller brackets
    • The beam (cross bar) is responsible for supporting the entire roller system. The roller brackets are attached to the beam with a pre-calculated angle of inclination.
  3. Roller
    • The roller material is usually galvanized steel or heavy-duty hard plastic, which ensures enough friction for the pallet to slide. Each shelf has multiple parallel rows of rollers, positioning the direction of movement for the pallet.
  4. Reduction mechanism
    • To prevent pallets from sliding excessively, Flow Racks often have additional brake elements or speed bumpers. The purpose is to protect goods, avoid strong collisions.
  5. Pallet separation mechanism
    • At the end of the journey (the outbound location), there is a separator that “locks” the top pallet. As a result, workers picking up pallets are not crushed or moved unexpectedly by the pallet behind.
Design and Structure Features of Flow Rack Roller Pallet Rack
Design and Structure Features of Flow Rack Roller Pallet Rack

2.2. Principle of operation

  • The operator places the pallet at the high end of the shelf.
  • The pallet slides down on its own thanks to gravity and a roller system.
  • When it reaches the end, the pallet is secured by the separator.
  • When this pallet is removed, the rear pallet continues to slide back to the shipping position.
  • The cycle repeats until the shelf is empty, ready for a new stack.

With packaging, this process creates seamlessness: cartons, wrappers, bottles… are “queued” neatly and sequentially, making retrieval fast and accurate.

Benefits of pushback shelving systems in supermarket warehouses

@giakelongquyen Benefits of pallet flow racking system in #kepallet warehouse #kedongchay #palletflow #giakecongnghiep #giakelongquyen #pallet ♬ background music – Long Quyen Shelf Rack

3. Benefits of Flow Rack Roller Pallet Rack for the Packaging & Packaging Industry

3.1. Optimize the speed of cargo turnover

Instead of having to use a forklift to unload each pallet, rearrange and move to the waiting area, the Flow Rack “supports” this operation naturally. Pallets are always available in the most convenient location to pick up and take out the packaging line, shortening the waiting time.

3.2. Packaging Quality Assurance

The peculiarity of paper and plastic packaging is that it is easy to get moldy and deformed if stored for too long or arranged unscientifically. With the FIFO design, the shipment that is imported first will be shipped first, limiting the situation of “forgetting” or “stuck” goods in the back. Since then, the quality of packaging has always been maintained at an optimal level.

3.3. Minimize labor and equipment costs

The Flow Rack significantly reduces the number of forklift uses. Warehouse staff also save time moving and arranging. This not only saves on the cost of gasoline or electricity for forklifts, but also reduces the risk of occupational accidents.

3.4. Increase warehouse capacity on the same area

Thanks to the roller mechanism, the space between pallets is optimized. Businesses can stack more pallets on the same area than regular Selective racking. In particular, when combined with high-rise warehouse design, the capacity increases significantly.

3.5. Flexibility in management and expansion

Flow Rack is usually quick to disassemble, easy to adjust the tilt, number of floors, and spacing between rows of rollers. When business needs change, or switch packaging items of different sizes, there is still flexibility to customize.

Benefits of Flow Rack Roller Pallet Rack for the Packaging & Packaging Industry
Benefits of Flow Rack Roller Pallet Rack for the Packaging & Packaging Industry

4. Notes when deploying the Flow Rack roller pallet rack

4.1. Determination of load and pallet specification

  • Maximum load: Each row of rollers has a fixed load capacity. If the pallet weighs more than the design, the roller is overloaded, causing damage or warehouse accidents.
  • Pallet size: It is recommended to synchronize the pallet size to ensure smooth movement, no jamming.

4.2. Calculate the right slope

  • Too steep: Pallets slide quickly, making it difficult to control the speed, increasing the risk of impact.
  • Too low: The pallet slides slowly or does not slide, affecting performance.
  • Normally, the slope ranges from 3 to 5% (depending on weight, contact surface).

4.3. Choosing the material of the roller and shelf frame

  • Warehouse environment: If the warehouse is damp or resistant to high temperature, it is recommended to choose galvanized steel rollers, avoid rust.
  • Packaging surface protection: Hard plastic rollers can avoid scratches with sensitive surfaces, but need to be sure of the load.

4.4. Incorporating safety factors

  • Guide rail: Keeps the pallet on the right slide, preventing it from overturning.
  • Reducer: Speed regulator, especially for heavy pallets.
  • Aisle Spacing: While the Flow Rack reduces the use of forklifts, there must still be a safe passage for operators.

4.5. Periodic management and maintenance

  • Check the system of rollers, slides, screws to make sure there is no damage.
  • Maintain, grease, and clean the roller surface regularly, especially when the packaging has paper dust and shrink film sticking to it.
What is pallet flow rack?
What is pallet flow rack?

5. Application of Flow Rack in typical packaging warehouse models

5.1. Centralized warehouse carton packing

Cartons of all sizes, usually warehoused in several batches a day. Flow Rack will keep old cartons always “floating” first, avoiding backlogs for too long. Thanks to the FIFO mechanism, businesses are more proactive in warehousing and production schedules.

5.2. Warehouse of plastic bottles and glass bottles

Bottles tend to be fragile and deformed. With the Flow Rack, the operator has less direct impact on the pallet, limiting impact. In addition, the continuous “discharging” of goods helps the bottles to circulate quickly, reducing the risk of environmental damage.

5.3. Warehouse of wrapping film, tape, labels

This is a group of goods that usually have their own shelf life or at least their own quality life cycle. Flow Rack supports businesses to bring pre-imported rolls of wrapping film and tape to use first, preserving plasticity and adhesion.

5.4. Medical and Food Packaging Warehouse

Medical and food packaging requires stricter storage conditions (in terms of hygiene and safety). Flow Rack has a minimalist design, few hidden corners, convenient to clean and arrange. FIFO also helps to transparently track the “life” of the packaging.

Application of Flow Rack roller pallet racking in typical packaging warehouse models
Application of Flow Rack roller pallet racking in typical packaging warehouse models

Frequently Asked Questions (FAQs)

1. Is the Flow Rack Roller Pallet Rack suitable for packaging of all sizes?

Flow Rack works best when pallets are relatively uniform in size and load. However, you can still customize the slope, roller spacing, or use different rows of shelves to accommodate a wide range of packaging sizes.

2. Does the Flow Rack require complex maintenance?

Basically, the Flow Rack needs to check the rollers, clean, grease and tighten the screws periodically. The maintenance process is not too complicated, but it should be carried out regularly to ensure safety and longevity.

3. How to control the sliding speed of the pallet?

Standard Flow Rack systems are usually equipped with reducer brakes or brake plates. This is a sliding speed control solution, avoiding strong collisions when pallets go to the end of the shelf.

4. When the pallet has a difference in weight, will the Flow Rack work stably?

If the difference is not too large, you can still design the average slope to accommodate the majority. If the volume fluctuates extremely large, it is recommended to divide the Flow Rack area separately for each load group, or discuss with the supplier for a detailed solution.

5. Does Long Quyen Company support the installation of Flow Rack for cold storage?

Have. Long Quyen provides shelving solutions in many environments: cold storage, freezer storage, high temperature. Frame materials, rollers, powder coating will be adjusted in accordance with specific warehouse conditions.

[dflip id=”150602″][/dflip]

About Long Quyen Company

In the industry of manufacturing and providing warehouse shelf solutions in Vietnam, Long Quyen Company is a leading brand, trusted by a large number of customers. Over 25 years of development, Long Quyen provides a variety of warehouse shelving solutions such as:

Expert team and production process

Long Quyen owns a team of experienced, enthusiastic engineers and technicians with a deep understanding of mechanics and warehouse design. Each Flow Rack roller pallet racking project is meticulously planned:

  1. Field survey: Measuring the area, height, determining the flow of movement, pallet type.
  2. Detailed Design: Calculate the load, roller slope, frame material.
  3. Production and processing: On modern lines, ensuring accuracy and uniformity.
  4. Installation and acceptance: Ensure safety and smooth operation before handover.

After-sales service and warranty

  • Warranty policy: The product is guaranteed according to factory standards, with high-quality component replacement service.
  • 24/7 technical support: Help businesses quickly fix problems and maintain smooth warehouse operations.
  • Extended consulting: When storage demand increases, Long Quyen is always ready to support, upgrade or adjust the shelf system optimally.

Long Quyen’s success is evidenced by hundreds of projects implemented for domestic and foreign packaging, food, and fast-moving consumer goods (FMCG) manufacturing enterprises.

perspective of roller pallet racks in the project installed by Long Quyen
perspective of roller pallet racks in the project installed by Long Quyen

Contact Information

HOT LINE:

0903422179 (Mr. Dat)
0903412296 (Mr. Hien)
0903434374 (Mr. Cam)

EMAILS:

contact@giakelongquyen.com
contact@longquyen.com

OFFICE:

79 Dao Tan St., Giang Vo Ward, Ha Noi, Viet Nam
84-24-37260098; Fax: 84-24-32115955

FACTORY:

1085 Phuc Dien St., Xuan Phuong Ward, Hanoi, Vietnam
84-24-37643527; Fax: 84-24-37643767

[wpforms id=”119062″]

Sign up to receive the latest news via email

* indicates required