Structure of a Cantilever Rack: A Detailed Guide to Its Components

Structure of a Cantilever Rack: A Detailed Guide to Its Components

Cantilever racks are among the most common storage solutions in Vietnam’s industrial warehouses. With their distinctive design that uses no center posts, they allow long, heavy goods such as steel, pipes, timber boards, aluminum and glass to be stored efficiently. To maximize capacity and ensure safety, however, you need to understand the structure of each component. This article explains the structure, the main parts and how they work together to form a durable storage system.

Overall Structure of a Cantilever Rack

A cantilever rack is designed on a simple but highly effective mechanical principle. Unlike traditional pallet racks, it has no center posts and instead uses a heavy base with arms on one or both sides to support goods.

Basic Working Principle

The structure of a cantilever rack is based on leverage and the balance of gravity. The heavy base at the bottom provides the fulcrum, while the arms above carry the load from the goods. This design allows:
  • Easy access: With no center posts in the way, forklifts and hand trucks can reach goods from every direction
  • Storage of long goods: Arms can be designed from 1 m to 3 m long or more, suitable for large goods
  • Flexible layout: Racks can be arranged in one row or two rows (back-to-back) to optimize warehouse space

Types of Cantilever Rack

Based on arm arrangement, cantilever racks fall into two main types:
Rack Type Features Applications
Single-sided cantilever rack Arms on one side of the column only Storage along walls, warehouses with limited space
Double-sided cantilever rack Arms on both sides of the column Storage in the middle of the warehouse, space optimization

Main Components of a Cantilever Rack

A complete cantilever rack system consists of many components, each playing an important role in the rack’s durability, safety and performance.

1. Column (Upright)

The column is the main vertical member, usually made of C- or U-section steel. The column serves to:
  • Carry the load from the arms and goods
  • Connect the base and the arms
  • Provide height for the storage system
  • Usually include holes for mounting arms at different heights
Under the FEM (Fédération Européenne de la Manutention) standard, cantilever rack columns must meet high load-bearing requirements and a minimum rigidity to prevent deformation.

2. Arm (Bracket)

The arm is a horizontal member attached directly to the column. This is where goods are placed. Arm characteristics include:
  • Material: Usually I- or H-section steel, sometimes cast steel
  • Length: From 1 m to 3 m or more, depending on storage needs
  • Depth: Usually 300 mm to 600 mm
  • Load capacity: Depends on steel thickness and design, from 100 kg to 500 kg per arm
Arms are designed with slots for attaching shelf decks or auxiliary support bars.

3. Base (Foot)

The base is the horizontal member at the very bottom, carrying the entire weight of the system and goods. Base characteristics include:
  • Shape: Usually T- or I-shaped, with two parallel base feet
  • Length: The longer the base, the higher its moment capacity
  • Weight: The base must be heavy enough to balance the weight of goods on the arms
  • Material: High-rigidity section steel or cast steel
The base usually has holes for fixing to the warehouse floor, especially when storing heavy goods.

4. Horizontal Bracing (H Bracing)

Horizontal bracing connects two columns at the same height. Its functions are to:
  • Increase the lateral rigidity of the rack
  • Prevent the columns from bending
  • Distribute forces from the arms
  • Improve the overall stability of the system

5. Diagonal Bracing (X Bracing)

Diagonal bracing connects two columns crosswise, forming an X shape. It is important because it helps to:
  • Increase rigidity in the depth direction
  • Prevent the rack from twisting or overturning
  • Improve dynamic load capacity (when forklifts are operating)
  • Ensure the safety of workers and goods

Key Dimensions

To design and install a cantilever rack correctly, you need to understand its main dimensions:

A – Upright Height

This is the distance from the floor to the highest point of the column. This height affects:
  • The number of shelf levels that can be installed
  • Access to goods on the upper levels
  • Safety when forklifts are operating
Under safety rules, the maximum height usually does not exceed 2.5 m for conventional cantilever racks and 3.5 m for cantilever racks with a special locking system.

B – Foot Height

The height from the floor to the lowest arm mounting point. This dimension determines:
  • The distance from the floor to the lowest shelf level
  • Forklift access
  • The stability of the whole system

C – Double Foot Length

This is the total length of the base from the outer end of one foot to the outer end of the other. It is very important because it:
  • Determines the rack’s moment capacity
  • Affects stability under unbalanced loads
  • Is usually 1.5 m to 2.5 m for standard cantilever racks
The formula for moment capacity is M = W × L, where W is the weight of the base and L is the distance from the center of the base to the point where the force acts.

D – Arm Length

The distance from the column to the end of the arm. This dimension affects:
  • The ability to store long goods
  • Arm rigidity (the longer the arm, the lower its rigidity)
  • Load capacity (capacity falls as the arm gets longer)

E – Section Length

This is the distance from one column to the next in the same row. It affects:
  • The number of columns needed
  • The efficiency of warehouse space use
  • Investment cost (the greater the distance, the higher the cost)

Shelf Decks and Deck Types

The shelf deck is the part in direct contact with goods. There are several deck types, each with its own advantages and disadvantages:

1. Wire Mesh Deck

A wire mesh deck is made of steel wires welded crosswise to form a small grid.
  • Advantages: Light, good airflow, easy to clean, low cost
  • Disadvantages: Not suitable for small goods or items that fall easily, low rigidity
  • Applications: Storage of steel, pipes, timber boards and building materials

2. Steel Panel Deck

A steel panel deck is made of steel sheet 1.2 mm to 2 mm thick, either flat or corrugated.
  • Advantages: High rigidity, flat surface, suitable for small goods, easy to clean
  • Disadvantages: Heavier than a mesh deck, higher cost, poorer airflow
  • Applications: Storage of small goods and items that fall easily, cold stores, humid warehouses

3. Support Bars

Support bars are small steel bars mounted at right angles to the main arms to support the shelf deck. They help to:
  • Increase the rigidity of the shelf deck
  • Reduce deck deflection under load
  • Distribute forces evenly across the deck

Bracing and Bracing Frames

The bracing and bracing frame system is the most important part for ensuring the safety and stability of a cantilever rack.

Horizontal Bracing (H Bracing)

Horizontal bracing connects two parallel columns at the same height. In a standard design:
  • Horizontal braces are installed on the front and back of the columns
  • There are usually 2–3 horizontal braces at different heights
  • They increase lateral rigidity and prevent bending

Diagonal Bracing (X Bracing)

Diagonal bracing forms an X shape between two columns or between horizontal braces. Its main functions are to:
  • Increase rigidity in the depth direction
  • Prevent the columns from twisting
  • Improve dynamic load capacity
  • Under the FEM standard, diagonal bracing is mandatory for cantilever racks taller than 2 m

Bracing Bracket

Bracing brackets are metal frames connecting horizontal braces to columns, or horizontal braces to arms. They:
  • Distribute forces from the arms to the base
  • Increase overall rigidity
  • Are installed at high-stress locations

Safety Systems and Stops

The safety system is a vital part for preventing goods from falling and keeping workers safe. A standard cantilever rack includes:

1. Forklift Guide Rail

Guide rails are metal bars mounted on the floor to guide forklifts or hand trucks in the correct direction. Their functions are to:
  • Prevent forklifts from hitting the columns
  • Improve worker safety
  • Protect the rack from damage

2. Stop Pin

Stop pins are small metal bars mounted at the end of the arm to stop goods from falling. Types of stop pin include:
  • Fixed stop pins: Always mounted on the arm
  • Removable stop pins: Can be fitted or removed as needed
  • They are usually installed at both ends of the arm

3. Lock Pin

Lock pins secure the arm to the column, preventing it from slipping or moving unintentionally. Lock pins are usually:
  • Installed where the arm is mounted to the column
  • Locked or unlocked as needed
  • Used to improve safety during rack installation or maintenance

Advantages and Applications of Cantilever Racks

Cantilever racks are widely used in many industries, from manufacturing and logistics to retail, thanks to their outstanding advantages:

Main Advantages

  • Easy access: With no center posts, goods are easy to reach from every direction
  • Storage of long goods: Suitable for steel, pipes, timber boards, aluminum, glass and building materials
  • Space optimization: Racks can be arranged in one row or two back-to-back rows to make good use of warehouse space

Frequently Asked Questions (FAQs)

›What is the structure of a cantilever rack?
A cantilever rack consists of columns, arms, bracing and shelf decks. Long Quyền designs, manufactures and installs racks to ISO 9001:2015, suitable for modern warehouses and factories. This guide draws on nearly 30 years of experience.
›Why choose a cantilever rack from Long Quyền?
Long Quyền cantilever racks are produced on an automated line using high-quality steel and color-fast powder coating, with full warranty coverage. Our technical team handles on-site surveys, installation and after-sales service.
›Where can I get a quotation for a cantilever rack?
Please contact Hotline 0903 422 179 (Mr. Đạt) or visit giakelongquyen.com for an on-site survey and a detailed quotation based on your usage needs and warehouse area.
›Do cantilever racks come with a warranty?
All Long Quyền products come with a manufacturer’s warranty. The warranty period is 24–60 months (depending on the type of rack and accessories) and is stated clearly in the contract. Contact Hotline 0903 422 179 (Mr. Đạt) or visit giakelongquyen.com for details.
›Can I order a cantilever rack in custom sizes?
Yes. Long Quyền manufactures to your requirements for size, load capacity and color, to suit your warehouse conditions.
See more of Long Quyền’s warehouse racking solutions, or learn about warehouse concepts to plan your storage layout.

Real photos of cantilever racks by Long Quyền

Genuine Long Quyền cantilever rack
Structure of a Cantilever Rack: A Detailed Guide to Its Components 6
Cantilever rack installed in a warehouse
Structure of a Cantilever Rack: A Detailed Guide to Its Components 7
High-load cantilever rack in powder-coated steel
Structure of a Cantilever Rack: A Detailed Guide to Its Components 8
Real photo of a cantilever rack – Long Quyền
Structure of a Cantilever Rack: A Detailed Guide to Its Components 9