Why choose a Cantilever support shelf frame for the “new type of warehouse”?
1) Built-in Structure & Function
- Shelf = Warehouse frame: main column system, tie rods, stands, supports… are arranged to bear both storage and construction loads (wind, roof, walls), forming a “rack-supported warehouse” model.
- Do not get entangled in the front column to prevent the way: the front is open, the forklift reaches 100% of the length of the row (pipes, shaped steel, wood, boards, coils…).
2) Cut the initial investment cost
- Eliminate most of the steel columns–trusses–beams of the traditional warehouse frame.
- Optimize steel according to the actual storage load (no excess “filling”).
- Reduce temporary lifting equipment: lightweight components, modular assembly, small cranes.
3) Shorten the progress by ~50%
- Modular construction: erecting the front shelf frame, installing the roof panel – rear wall.
- Do not wait for shelves to be installed after handing over the project: the warehouse is finished, there are shelves.
- Parallelize many teams: foundation – anchor, frame erection, installation of supports, panel cladding, electrical duel – fire protection.
4) Increased density & operational safety
- High container density for long/bulky rows.
- Optimal passage according to the forklift turning radius.
- Planning for fire and explosion routes, lighting, and instructions right in the frame.
10 Cantilever Armrest Benefits You’ll See in 12–18 Months
- CAPEX decreased by 12–25% compared to the steel frame + bulk shelf option.
- The withdrawal progress is 30–50% (depending on the area and number of spans).
- Container density increased by 20–40% for long/large format goods.
- Loading and unloading times are reduced by 15–30% thanks to the open front and the right stacking scheme.
- Low maintenance costs: standard bolts/screws, independently replaceable support arms.
- Easy expansion: add cavities, connect spans, upgrade arm loads.
- Reduce cargo damage (hammocks, bends, dents) due to sufficient support points.
- Safe route flow: separation of forklift-pedestrian flow.
- Modularity: dismantling, relocation, rapid reconfiguration.
- Optimize TK (with required projects): domestic production, fast delivery.
Typical Applications of Cantilever Support Arm Shelf
- Steel tube, shaped steel, aluminum bar, copper
- Lumber, MDF/HDF boards, film-coated boards
- Plastic pipes, HDPE/PVC pipes, pipe fittings
- Long interior materials (wool, braces, pillars)
- Material rolls (carpets, tarpaulins, cable modules, coils)
- Marine – shipbuilding: long profiles, conduits, cable trays

Structural Principle of Cantilever Arm Shelf
Main Components
- Main column (U/I/box tube): composite compression–bending; is the “backbone” of the frame.
- Stand–anchor platform: transmit force to the foundation; code & anchor bolts.
- Handle: load support; with anti-drop pins; straight/angle/hook head configuration.
- Back bracing–cross bracing–roof bracing: anti-shaking, anti-twisting, framing space.
- Roof–purlin link bars: roof panels, gutters, corrugated iron/covering materials.
Load Diagram
- Static load: shelves themselves, roofs, panels, accessories.
- Loading: goods on the handle; wind loads; roof load (rain, maintenance).
- Impact impact: forklift, vibration when loading and unloading.

Cantilever Arm Shelf Design Process
Step 1: Survey & make a brief
- Type, size, length–diameter, weight/piece.
- Rotation cycle, lifting vehicles (forklifts, side-loaders, VNAs…).
- Fire protection requirements (nozzles, emergency exits, water flow).
- Land, local wind, rain, background load, geodesy.
Step 2: Plan the site & flow
- Aisle width according to forklift turning radius + safety.
- Zoning: import-export-warehousing-processing-packaging.
- Escape routing and fire safety distances.
Step 3: Rack–frame configuration
- Shelf height: according to forklift/environmental limits (e.g. 6–12 m).
- Reach of support: according to width/load of bales; number of arms/frame.
- Number of armrest layers: according to height, safe operation distance.
- Back bracing/cross bracing: according to the cadence and wind load.
Step 4: Calculate Structure & Foundation
- Column bending–compression test; hammocks; overall stability.
- Code design –anchor bolts; test for puncture of the foundation.
- Concrete foundation: strength, thickness, steel mesh, concrete grade.
Step 5: Roof-wall combination
- Panel/ton: light weight, corrosion resistance, noise resistance.
- Purlins bond directly to the shelf frame.
- Sliding /roll-up, ventilation & lighting.
Step 6: Fire Protection – Electrical – Lighting
- Sprinkler mesh is suitable for combustible density & storage height.
- Lighting by lux area; arrange exit signs, incident lights.
- Hanging electrical cabinets /technical compartments integrated into the frame.
Step 7: Erection & acceptance
- Erecting poles & bracing → installing support arms → checking the tightening force of bolts → roof cladding – electrical → wall – fire protection → load acceptance.
- Attach load plates for each compartment; operation training.

Recommended Parameters for Cantilever Warehouse (design reference)
- Shelf height: 6–12 m (depending on forklift & cargo type).
- Reach support: 600–1,800 mm.
- Load per handle: 300–1,500 kg.
- Column spacing: 1,000–2,500 mm.
- Number of useful support tiers: 3–7.
- Ground anchor: M16–M24; anchor depth by design.
- Bracing: profiled steel; bracing span 2–3 compartments.
Note: Actual parameters need to be calculated according to the load, standard, local wind, ground and specific lifting vehicle.

Comparison of 2 options: Traditional vs. Cantilever Shelf Frame
Option A: Traditional steel frame + removable shelves
- Pros: familiar, available contractors.
- Cons: Higher CAPEX; construction 2 times (frame → shelves); extended duration; the density of long rows is not optimal.
Option B: Cantilever rack-supported warehouse
- Pros: integrated functions; Low CAPEX; fast progress; flexibility to expand.
- Technical notes: synchronous design requirements; background test–anchor; coordinated fire protection and electricity from the beginning.
15 “golden” notes for the Cantilever support shelf frame project
- Determine the maximum bale length → select the support reach.
- Minimum 3 support points for long bales to reduce sagging.
- Arrangement of stoppers/first pins to support round/roll rows.
- Calculate the allowable deflection (L/200… L/250 depending on the component).
- The operating clearance ≥ 75–100 mm between floors.
- Forklift turning radius + safety corridor is the No. 1 criterion when routing.
- Reinforce anti-torsion bracing at the edges and gables.
- Choose the right paint/plating (moist, salty → hot-dip galvanized).
- The local foundation does not crack/puncture at the foot of the large loading column.
- Spare hanging points for cable trays, lights, sprinklers right from the design.
- Clear and durable load sign standards.
- Setting up SOPs for loading and unloading: type of vehicle, angle of approach, vehicle speed.
- Upgrade the support arm according to the module as the load increases.
- Make an annual inspection plan .
- Future expansion planning: sparing spans, foundations, electricity – fire protection.

FAQs (6 Frequently Asked Questions)
1) Are Cantilever Support Arm Shelves hard enough to make a warehouse frame?
Yes, when designing specifically according to the building load (roof–wind) and storage load, with a full space bracing system and standard foundation anchors. Need a qualified engineer for verification.
2) Which forklift is suitable?
Most: counterbalance, side-loader, reach truck. Rows > 6 m long prioritize side-loaders/clamp trucks.
3) Reasonable height?
6–12 m wide; depending on the lifting height, fire protection, lighting and local regulations.
4) Is it scalable?
Have. The modulus helps to connect the span, lift the load, and increase the floor flexibly without breaking the overall structure.
5) Is fire protection complicated?
Proper nozzle irrigation is required, clearance control and emergency exits are required. From the design phase to optimization.
6) How is the maintenance?
Check the hammock for support, distortion of the pole, bolts; protective paints; make a monthly/quarterly checklist; annual inspection.
Conclude
Cantilever racking is a natural step forward for long /bulky storage businesses, helping to reduce investment costs, shorten schedules, maximize density , and increase operational safety. Refer to more of our products: Long Quyen mezzanine floor shelves, portable steel racks, selective racking, iron shelves, warehouse shelves
Are you considering upgrading your warehouse, expanding your workshop or building a new one?
Contact Gia Khe Long Quyen for a free survey, receive a 3D–layout plan, a detailed estimate and the optimal ROI roadmap for your case.
HOT LINE:
EMAILS:
OFFICE:
- 79 Dao Tan St., Giang Vo Ward, Ha Noi, Viet Nam
84-24-37260098; Fax: 84-24-32115955
FACTORY:
- 1085 Phuc Dien St., Xuan Phuong Ward, Hanoi, Vietnam
84-24-37643527; Fax: 84-24-37643767
[wpforms id=”119062″]
