A hot factory not only reduces labor productivity, but also erodes equipment life, raises energy costs, and increases the risk of accidents due to heat shock. One of the lesser-known culprits is the mezzanine – a seemingly harmless “expanded” space that can lock convection currents, accumulate radiation, and create a miniature greenhouse effect.
This article analyzes 5 common mezzanine floor design mistakes that cause the factory to get hot, accompanied by a correction solution from Long Quyen The optimal solution to cool down quickly, sustainably and cost-effectively.
1. Sealed mezzanine floor – completely blocks convection flow
Phenomenon:
The air in the mezzanine is always 3–5 degrees hotter than the area outside the hallway, even if there is a hood fan installed on the roof. Workers often complain of feeling stuffy and secretive, especially at noon.
Cause:
Using closed boards or corrugated iron floors makes the hot air flow unable to escape to the roof, trapped between the ceiling and the mezzanine floor, causing a miniature greenhouse effect. This is a common error in mezzanine floors that are extended later or temporarily.
Solution:
-
Prioritize the use of perforated steel grating flooring to help the air be more ventilated by 60%
-
Arrange additional air outlets or ventilation cells along the main beam.
-
Incorporate a large ceiling fan (HVLS) to create a stronger convection current, pulling hot air out of the blocked area.
2. Heat-absorbing materials – the silent cause of factory overheating
Phenomenon:
The surface of the mezzanine floor emits heat like a “hot pan”, the temperature in the area under the mezzanine can exceed 35 °C even without operating machinery. The situation of hot factories increased sharply from 11 a.m. onwards.
Cause:
Mezzanine floor panels are made from strong heat-absorbing materials such as black corrugated iron, dark paint, or no insulation. Sunlight penetrates the corrugated iron roof and is steamed back at the floor, causing prolonged heat accumulation.
Solution:
-
Choose floors with insulation such as PU panels, PIR ≥ 50 mm thick.
-
Paint the mezzanine surface with a light color or cover with reflective paint.
-
Cover the roof with silver film or specialized insulation roof paint to reduce heat radiation transmitted down.
3. Lack of forced ventilation under the mezzanine floor
Phenomenon:
Even if the roof fan has been installed, the area under the mezzanine floor is still hot, the humidity is high, and the air does not circulate. The CO₂ sensor regularly warns of exceeding safe levels.
Cause:
Most factories only install exhaust fans on the roof without a forced fresh air supply system. The hot air could not escape, but was also sucked in from other places, accumulating under the mezzanine.
Solution:
-
Add a fresh air supply fan that works in parallel with the roof exhaust fan.
-
Lead the supply air duct straight down to the mezzanine area for direct convection.
-
Attach a temperature/CO₂ sensor and program the fan system to automatically adjust in real time.
4. The mezzanine floor design is too low – reduce the height of ventilation
Phenomenon:
The distance between the floor and the mezzanine floor is too low, making the space cramped, making it difficult for air to circulate. The working areas become hot, easy to accumulate moisture, leading to the phenomenon of the factory heating locally .
Cause:
Many factories try to take advantage of the overall height by placing the mezzanine floor as low as possible to increase the upper storage shelf. However, the clearance < height of 2.4 m reduces the circulation of air, and the heat is trapped close to the workers’ heads.
Solution:
-
Design a minimum ground floor height of 2.6 m before adding a mezzanine floor.
-
Prioritize the use of lightweight, non-heat-generating goods placed on the mezzanine floor to reduce the load and optimize the structural design.
-
Combine horizontal ventilation with a wall exhaust fan or a high-power centrifugal fan.
Design a minimum ground floor height of 2.6 m before adding a mezzanine floor
5. Arrange goods to shield the wind
Phenomenon:
Some areas in the factory have temperatures that are 3-7 °C higher than others, although the fan system is evenly distributed. The results of the heat map test show that the hot air is concentrated in places where the fan is blocked or there is no air outlet.
Cause:
High cargo arrangement shields the suction or blowing of the fan so that airflow cannot circulate. This situation is especially common when the mezzanine floor is used as a storage area for inventory, pallets stacked up to the ceiling.
Solution:
-
Keep a distance of at least 1 m between the cargo and the ventilation equipment.
-
Design empty air corridors along the shelves to ensure airflow throughout.
-
Install a ceiling-mounted fan below the mezzanine, vertical fan, or flexible ventilation system to avoid heat dead spots.
Quick checklist: Effective heat reduction for mezzanine
| Design elements | Recommendations | Expected effect |
|---|---|---|
| Types of mezzanine floors | Floor grating loss ≥ 60% | Increase hot air convection |
| Floor materials | Silver-coated PU/PIR panels, bright paint | Reduce radiation, heat absorption |
| Forced ventilation | Proper power supply-suction fan (6–8 ACH) | Reduce Heat & Humidity |
| Clearance height | ≥ 2.6 m below mezzanine | Creating airflow |
| Merchandise layout | Leave the corridor ≥ 1 m, do not cover the fan | Reduce local hotspots |
Why should you choose Long Quyen mezzanine floor flooring for your warehouse?
Long Quyen is one of the pioneers in Vietnam specializing in manufacturing and installing industrial mezzanine floors for warehouses and factories with nearly 30 years of experience. When choosing a mezzanine floor floor designed and constructed by Long Quyen, businesses will receive outstanding advantages:
1. Optimal structure for airflow and heat dissipation
Long Quyen’s mezzanine floor is designed with a 60% perforated steel grating ≥, allowing hot air to circulate easily from the bottom to the top, minimizing the situation of the factory being hot and secret.
2. Effective heat absorption resistance
Long Quyen uses bright powder coating materials, or PU/PIR insulated mezzanine panels that help reflect up to 80% of heat radiation from the roof, keeping the temperature stable under the mezzanine floor in all weather conditions.
3. Customized design according to the characteristics of each factory
Without applying a fixed model, Long Quyen surveys the current situation, analyzes storage characteristics, arranges the fan system – goods – workshop height to design the most suitable mezzanine floor , ensuring airflow, load and the ability to disassemble when upgraded.
4. Safe – durable – easy to maintain
Long Quyen mezzanine floor floor components meet load standards of up to 500–1000 kg/m², use JIS/SS400 standard steel, are robotically welded and tested for actual loads. The floor surface is easy to clean, dust-resistant, helping to maintain a clean and safe environment.
5. Optimize long-term costs
Not only does it help expand storage space, but it also minimizes cooling costs thanks to its breathable design, insulation and superior heat build-up resistance. As a result, businesses significantly save on electricity costs and maintain air conditioners in hot factories.
Contact us
HOT LINE:
EMAILS:
OFFICE: 79 Dao Tan St., Giang Vo Ward, Giang Vo Ward, Hanoi
FACTORY: Tay Mo Industrial Park, Hanoi
[wpforms id=”119062″]